With Measurabl's Arc Integration, you can import any number of sites from your Measurabl account into Arc’s platform. This prevents you from going through an additional extensive data collection process, and makes certification and recertification an effortless and scalable process.
Once a building is activated on the integration, the required site data (energy, water, waste) needed for the certification will import directly into Arc’s platform from the site in Measurabl. Please follow the guide below in order to activate your site(s) on the Measurabl / Arc integration!
How to Activate the Arc Integration:
Option 1:
- Login to your Arc portal by clicking here.
- Navigate to the site (project) that you are submitting for a LEED certification.
- Select the 'Credits/Actions' tab on the left-hand side > Choose 'Data Input' from the drop-down.
- When you 'Add a New Meter', a form will appear.
- At the bottom of the form, select the 'Measurabl' button under the 'Import Data' section.
Option 2:
- Login to your Arc portal by clicking here.
- Navigate to the site (project) that you are submitting for a LEED certification.
- Select the 'Manage' tab from the left menu to populate the drop-down options.
- Choose 'Apps', then click the Measurabl card.
- Click 'Get Started' to begin the process.
- You will then receive a confirmation of your activation, informing you that your data will be populated from Measurabl into Arc within 24-48 hours.
FAQs
- Why are the reading date periods different in ARC than in Measurabl?
-
The meter readings are calendarized in Arc.
-
- Why are the units different in ARC than in Measurabl?
- Measurabl provides data to Arc using an API, and each utility type has a default unit. Even if your data is stored in Measurabl in another unit, the API sends the data in the following units:
-
Electricity, onSiteRenewableElectric, offSiteRenewableElectric - MWh
-
Steam, Chilled Water, Hot Water - KBTU
-
Water - CM
-
Waste - MT
-
Natural Gas, Fuel, Propane, Diesel, Compressed Natural Gas, kerosene, wood, coke - Therms
-
- Measurabl provides data to Arc using an API, and each utility type has a default unit. Even if your data is stored in Measurabl in another unit, the API sends the data in the following units: